Standing Surface Acoustic Wave (SSAW)‐Based Fluorescence‐Activated Cell Sorter

Microfluidic fluorescence‐activated cell sorters (μFACS) have attracted considerable interest because of their ability to identify and separate cells in inexpensive and biosafe ways. Here a high‐performance μFACS is presented by integrating a standing surface acoustic wave (SSAW)‐based, 3D cell‐focusing unit, an in‐plane fluorescent detection unit, and an SSAW‐based cell‐deflection unit on a single chip. Without using sheath flow or precise flow rate control, the SSAW‐based cell‐focusing technique can focus cells into a single file at a designated position. The tight focusing of cells enables an in‐plane‐integrated optical detection system to accurately distinguish individual cells of interest. In the acoustic‐based cell‐deflection unit, a focused interdigital transducer design is utilized to deflect cells from the focused stream within a minimized area, resulting in a high‐throughput sorting ability. Each unit is experimentally characterized, respectively, and the integrated SSAW‐based FACS is used to sort mammalian cells (HeLa) at different throughputs. A sorting purity of greater than 90% is achieved at a throughput of 2500 events s^?1. The SSAW‐based FACS is efficient, fast, biosafe, biocompatible and has a small footprint, making it a competitive alternative to more expensive, bulkier traditional FACS.     

井下安全阀力学性能分析

井下安全阀对安全性和可靠性要求较高。以渤海油田常用油管携带式井下安全阀为分析对象,对其工作压力、地面控制压力、全开启和全关闭压力、最大下入深度和自平衡能力等关键力学性能进行分析。井下安全阀的工作压力值与地面液控压力值相等,其选取依据为井口压力; 全开启和全关闭液控压力值可通过压力曲线法得到; 最大下入深度取决于弹簧安装时的预紧力; 自平衡能力与活塞面积和自平衡孔面积的比值有关,比值越大,自平衡能力越强。     

焙烧铁尾矿制备透水砖试验研究

为了改善尾矿制砖的力学性质，解决尾矿堆积问题，采用焙烧铁尾矿、水泥和粉煤灰为胶凝材料，2.36~4.75 mm粒级铁尾矿为粗骨料，通过搅拌、成型和养护工艺制备透水砖，探究了焙烧铁尾矿用量、水胶比、目标孔隙率和振动时间对透水砖性能的影响，对比未焙烧尾矿制备透水砖的性能。结果表明：① 焙烧尾矿制备透水砖最佳试验条件为：焙烧尾矿掺量60%，振动时间40 s、水胶比0.3，目标孔隙率20%；此时，透水砖抗折强度为3.34 MPa，符合国家标准Rf3.0，抗压强度为15.44 MPa，符合国家标准MU15，透水系数为2.58×10-2 cm/s，符合国家标准A级标准，实测孔隙率为23.41%。② 焙烧尾矿掺量为60%时效果最佳；未焙烧尾矿掺量为50%时效果最佳，抗折、抗压强度分别为3.38 MPa和14.54 MPa，透水系数符合国家A级标准；焙烧尾矿比未焙烧尾矿多替代水泥10%的情况下，力学性能焙烧尾矿透水砖较好，而透水性能则未焙烧尾矿透水砖较好。     

基于近似测地线的分层次自动铺带轨迹规划方法

自动铺带技术是一种增量制造技术，适用于制造翼面、壁板等大尺寸、小曲率复合材料构件，具有加工成本低、效率高等特点。轨迹规划是自动铺带技术的关键环节，它直接关系到复合材料构件的成型精度与质量。现有的自动铺带轨迹规划方法难以便捷兼顾调控铺放间隙与防止铺放褶皱，保证铺带产品的最终质量。有鉴于此，提出了一种基于近似测地线的分层次铺放轨迹规划方法。主要目标是合理利用预浸带允许变形能力，在防止铺放褶皱产生的前提下，保证相邻带料不产生覆盖，且间隙不超过2.5 mm。首先，研究了铺放间隙的产生与演化规律，给出了几种典型曲面上初始铺放间隙的优化方法。接下来，提出了近似测地线的数学模型与求解格式。然后，基于铺放褶皱的产生机制与铺放间隙的演化规律，确定了近似测地线的测地曲率大小与符号。最后，在双曲面模具以及自由曲面模具上验证了所提出方法的有效性。     

某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

一种波长调制干涉仪光强实时反馈控制系统

提出了一种实时反馈控制系统,保证波长调制干涉仪的激光光强在波长调谐过程中的稳定性,以减小波长调制干涉仪因激光光强的波动产生的相位误差。该控制系统由光电探测器、数据采集卡、光电调幅器和控制软件等组成。实验结果表明,该系统的响应速度超过了干涉仪获取干涉图的速度,不仅能够稳定输出理想的光强值,而且还提高了干涉仪的测量精度。     

Study on Thermal Deformation Measurement of Optical Remote Sensing Satellite Platform Based on Machine Vision

To solve the special requirements of the high orbit optical remote sensing-satellite for the thermal deformation of the platform, the thermal deformation test and measurement scheme of the satellite platform is designed. Through the comparative analysis of test results, the rationality of the thermal deformation design of the platform structure is verified. The results of thermal deformation measurement show that the maximum deformation of A camera mounting surface is 57.5~〃, and the maximum deformation of B camera mounting surface points to 79.3~〃, which can be used as the basis for thermal deformation prediction of satellite during the orbit operation.     

Neutron Diffraction and Neutron Radiography Investigation into Powder Sintering of Ti/Al and TiH2/Al Compacts

Metallurgical and Materials Transactions B - Sintering behaviors of two types of powder compact, i.e., Ti/Al and TiH2/Al, under vacuum were studied using in situ neutron diffraction, in situ...     

Preparation of fused silica membrane with high performance for high temperature gas filtration by sealing and spray coating

In order to improve the gas permeability and thermal shock resistance of the ceramic membranes applied in high temperature gas-solid separation techniques, fused silica and graphite particles were used as the primary raw material and pore-former agent, and the spray coating based-on PVA sealing was applied to prepare the separation membrane. These approaches remarkably decreases filtration resistance by increasing support permeability and reducing the intrusion of ceramic membrane forming particles into the support as well as the thickness of the membrane. The fabricated membrane had an average pore diameter of 9.85?μm and a gas permeability value of 8.2?×?10⁴?m³/(m² h bar), its dust removal efficiency reached 98.6%.